Chat with us, powered by LiveChat
SKU: 12799. Category: .

12″ x 50″ KENT USA KTM-4VVF-E MANUAL KNEE MILL – NEW

PRODUCT FEATURES

  • 3 HP AC-Freq drive head with digital RPM display and analog load meter.  Automatic spindle direction reversal when switching between high and low speed gear ranges
  • 60-550-4500 spindle RPM (Hi/Low gear)
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column

OPTIONAL ACCESSORIES

  • Digital Readout System
  • Table (X-Axis) Power Feed
  • Saddle (Y-Axis) Power Feed
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant

 

  • Table Size
  • Table Travel (X-Axis)
  • Saddle Travel (Y-Axis)
  • Knee Travel (Z-Axis)
  • Quill Travel
  • Ram Travel
  • Spindle Motor
  • Spindle Speed
  • Spindle Taper
  • Quill Diameter
  • Quill Feed Rate
  • Drilling Capacity (Manual / Power)
  • Boring Capacity
  • Milling Capacity
  • Maximum Work Load (Center)
  • Spindle Nose to Table Surface
  • Spindle Center to Column
  • Net Weight
  • Gross Weight
  • Shipping Dimensions
  • Power Requirements

  • KTM-4VKF-E

  • 12″ x 50″
  • 33″
  • 18″
  • 15.25″
  • 5.5″ (4″ w/MillPwr-3 CNC Control)
  • 22″
  • 3 HP
  • 60–500-4200 RPM (Var) (60-600 Optional)
  • R-8
  • 3.375″
  • 0.0015″ / 0.003″ / 0.006″ in/rev
  • 0.75″ / 0.37″ diameter
  • 6″ diameter
  • 2.0 in³/min
  • 850 lbs
  • 2.75″ – 17.75″
  • 5″ – 27″
  • 3400 lbs
  • 3600 lbs
  • 72″ x 72″ (skid)
  • 220 Volts. 3 Phase, 60Hz, (10 Amp (Optional 440V, requires 5 Amp)