Chat with us, powered by LiveChat
SKU: 12800. Category: .

12″ x 50″ KENT USA KTM-5VVF-E MANUAL KNEE MILL – NEW

PRODUCT FEATURES

  • 5 HP AC-Freq drive head with digital RPM display and analog load meter
  • 60-550-4500 spindle RPM (Hi/Low gear). Automatic spindle direction reversal when switching between high and low speed gear ranges
  • NMTB-40 spindle taper
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column

OPTIONAL ACCESSORIES

  • Quick change tooling package (Mach-1)
  • NMTB-30 spindle
  • Flood coolant system (Built-in base)
  • Knee (Z-axis) power feed
  • Air power drawbar
  • Flood coolant system
  • Chip tray
  • 3-D edge finder
  • Knee linear encoder feedback for coupled z-axis position
  • AMI with programmable M-functions

 

 

  • Table Size
  • Table Travel (X-Axis)
  • Saddle Travel (Y-Axis)
  • Knee Travel (Z-Axis)
  • Quill Travel
  • Ram Travel
  • Spindle Motor
  • Spindle Speed
  • Spindle Taper
  • Quill Diameter
  • Quill Feed Rate
  • Drilling Capacity (Manual / Power)
  • Boring Capacity
  • Milling Capacity
  • Maximum Work Load (Center)
  • Spindle Nose to Table Surface
  • Spindle Center to Column
  • Net Weight
  • Gross Weight
  • Shipping Dimensions
  • Power Requirements

  • KTM-5VKF-E

  • 12″ x 50″
  • 33″
  • 18″
  • 15.25″
  • 5.5″ (4″ w/MillPwr-3 CNC Control)
  • 26.75″
  •  HP
  • 60–500-4200 RPM (Var) 
  • NTMB-40
  • 4.173″
  • 0.0017″ / 0.0032″ / 0.0054″ in/rev
  • 1.25″ / 0.625″ diameter
  • 8″ diameter
  • 2.5 in³/min
  • 850 lbs
  • 4″ – 19.5″
  • 5.25″ – 32″
  • 3700 lbs
  • 4100 lbs
  • 72″ x 72″ (skid)
  • 220 Volts. 3 Phase, 60Hz, (10 Amp (Optional 440V, requires 8.5 Amp) Single Ph Available