Chat with us, powered by LiveChat

NEW 10.04″ DETRON MODEL GXA-255H NC ROTARY TABLE 

Worktable diameter Ø255, Ø320, Ø400 
Big spindle bore allow the more complex parts clamping
and fixture.

 Ultra high clamping force.

Consolidated spindle with radial-Axial bearing. built-in.

Full gear depth transmitted by dual lead worm drive,
resulting in higher efficiency and lower backlash.

Consolidated spindle with radial Axial
bearing built-in

Worktable Diameter                                            10.04″
Center Bore Diameter 5.51H7
Through-Bore Diameter 3.94″
Height Of Table (Horizontal) 8.27″
Height Of Center (Vertical) 7.48″
Width of T-Slot 0.47H7
Width of Guide Block 0.71″
Clamping Method Hydraulic
Clamping Pressure 725 PSI
Clamping Torque 663.3  Ft. Lbs
Transmission Ratio 1/120
Max Table Speed 22.2 RPM
Resolution 0.001 Deg
Indexing Accuracy 15 Sec
Repeatability 6 Sec
Net Weight (Servo Motor Excluded) 251 Lbs
Allowable Loading Capacity  
     Vertical 150 Lbs
     Horizontal 300 Lbs
     Tailstock Applied 300 Lbs