Chat with us, powered by LiveChat

NEW 12.6″ DETRON MODEL GXA-320H NC ROTARY TABLE 

Worktable diameter Ø255, Ø320, Ø400 
Big spindle bore allow the more complex parts clamping
and fixture.

 Ultra high clamping force.

Consolidated spindle with radial-Axial bearing. built-in.

Full gear depth transmitted by dual lead worm drive,
resulting in higher efficiency and lower backlash.

Consolidated spindle with radial Axial
bearing built-in

Worktable Diameter                                            12.6″
Center Bore Diameter 7.08H7
Through-Bore Diameter 5.51″
Height Of Table (Horizontal) 9.25″
Height Of Center (Vertical) 8.27″
Width of T-Slot 0.55H7
Width of Guide Block 0.71″
Clamping Method Hydraulic
Clamping Pressure 725 PSI
Clamping Torque 1179.2  Ft. Lbs
Transmission Ratio 1/120
Max Table Speed 22.2 RPM
Resolution 0.001 Deg
Indexing Accuracy 15 Sec
Repeatability 6 Sec
Net Weight (Servo Motor Excluded) 323.4 Lbs
Allowable Loading Capacity  
     Vertical 200 Lbs
     Horizontal 880 Lbs
     Tailstock Applied 880 Lbs