Equipped With

10" X 20" BROWN & SHARPE MODEL 1 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
New 1966

SWING OVER TABLE .................................. 10"  

DISTANCE BETWEEN CENTERS, NOMINAL ................. 20"  

DISTANCE BETWEEN CENTERS, MAXIMUM ................. 22-3/4"  

GRINDING WHEEL MOTOR .............................. 2 HP  

WHEELHEAD SPINDLE SPEEDS .......................... INFINITELY VARIABLE  

GRINDING WHEEL SIZE ............................... 10" X 1" X 3"  

SWIVEL AT THE WHEELSLIDE .......................... 90 DEGREES EITHER WAY  

WHEEL SPINDLE SWIVELS ............................. 90 DEGREES EITHER WAY  

HEADSTOCK MOTOR ................................... 1/4 HP  

INFINITELY VARIABLE SPINDLE SPEEDS ................ 60 TO 600 RPM  

HEADSTOCK SPINDLE NOSE TAPER ...................... A2-5"  

HEADSTOCK SWIVELS EITHER SIDE OF ZERO ............. 90 DEGREES  

INFINITELY VARIABLE TABLE SPEED ................... 3" TO 150" IPM  

TABLE PER REV. OF HANDWHEEL:                             

  SLOW ............................................ 0.1"

  FAST ............................................ 1.5"

DWELL AT EACH OR ALTERNATE TABLE REV. ............. 0 - 2-1/2 SEC.

TABLE SWIVEL, SCALES FOR ANGULAR SETTING .......... 8-1/4 DEG.

SCALES-TAPER PER FT. .............................. 3-1/2" (25%)

AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER OR

  WORK AT EACH OR ALTERNATE REVERSALS ............. 0.0001" - .003"

HAND FEED PER REV. OF HANDWHEEL:                        

  SLOW ............................................ 0.1"

  FAST ............................................ 0.3"

TAILSTOCK SPINDLE TAPER ........................... #7 JARNO

TAILSTOCK SPINDLE TRAVEL .......................... 5/8"

APPROXIMATE WEIGHT ................................ 5,100 LBS

MACHINE FEATURES:                                          

  HYDRAULIC TABLE TRAVERSE                              

  AUTO INFEED                                            

  ADJUSTABLE TABLE DWELL                                

  RIGHT OR LEFT END WHEEL MOUNTING                      

  SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL      

   SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN      

   COMBINATION STRAIGHT AND TAPER GRINDING,            

   EXTERNAL OR INTERNAL  

  L.J. & R.H. GRINDING WHEEL COVERS                              

  DUAL DEAD/LIVE HEADSTOCK SPINDLE

  TABLE MOUNTED DRESSER

  SELF-CONTAINED COOLANT SYSTEM

  3/60/220-440 VOLT MOTORS

EQUIPPED WITH:

ACU-RITE SINGLE AXIS DRO, FOR THE TABLE TRAVERSE

BROWN & SHARPE SWING DOWN I.D. ATTACHMENT

B & S I.D. SPINDLE

ADAPTOR & MAGNETIC CHUCK MOUNTED ON WORKHEAD

EXTRA GRINDING WHEELS & HUBS

ASSORTMENT OF CENTERS