Equipped With

14" × 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER

New: 1971

Specifications:
Maximum Swing Over Table:  14-15/16 in
Maximum Grinding Diameter (Full Size Wheel):  14 in
Minimum Grinding Diameter:  0 in
Distance Between Centers:  48 in
Distance from Floor to Centers:  42-1/4 in

Table Swivel Range:
Toward Wheel Head:  10 Degrees
Away from Wheel Head:  3 Degrees

Table Taper Adjustment:
Toward Wheel Head:  4-1/2 Degrees per Foot
Away from Wheel Head:  1-1/4 Degrees per Foot

Lower Swivel Range (Right / Left):  90 Degrees
Upper Swivel Range (Right / Left):  30 Degrees

Grinding Wheel Size:  14 in × 2 in × 5 in

Cross Feed:
Automatic Infeed:  At Table Reversal
Diameter Reduction (Low):  0.0002 in – 0.005 in
Diameter Reduction (High):  0.005 in – 0.0125 in

Wheel Head Movement per Handwheel Revolution:
Low Range:  0.050 in
High Range:  0.250 in

Headstock / Footstock:
Taper Hole:  #9 BS
Work Rotation Speeds:  Variable
Headstock Spindle Nose:  American Lathe Standard No. 5
Headstock Swivel Toward Wheel Head:  90 Degrees
Headstock Swivel Away from Wheel Head:  30 Degrees

Table:
Table Traverse Speeds:  Infinite
Traverse Speed Range:  3 – 240 IPM
Minimum Movement Required to Reverse Table:  3/32 in
Table Reversal Accuracy:  0.004 in
Independent Right and Left Tarry:  0 – 5 Seconds

Mechanical Hand Table Traverse per Handwheel Revolution:
Rapid:  15/16 in
Slow:  0.2 in

Power Requirements:
Wheel Head Motor:  7-1/2 HP, 1730 RPM, 220/440 Volt
Hydraulic Pump Motor:  1 HP
Headstock Motor:  3/4 HP
Internal Grinding Attachment Motor:  2 HP, 3750 RPM
Cutting Fluid Pump Motor:  1/4 HP

Equipped with:
Lever-Operated Tailstock with Truing Attachment
Left and Right Tarry at End of Table Stroke
Self-Contained Coolant System
Self-Contained Hydraulic System
Variable Speed Headstock
Tailstock Dresser
Table Traverse System