-
- 10" 3 jaw chuck
- Steady rest(Dia. 35~220mm)
- Follow rest
- Work light
- Thread chasing dial
- 4-position tool post
- Coolant system
|
Capacity |
Swing over bed ways |
18” (460mm) |
|
Swing over cross slide |
10.2” (260mm) |
|
|
Swing over gap |
26.7” (680mm) |
|
|
Gap length (w/ face plate) |
10.2” (260mm) |
|
|
Bed width |
13.2” (336mm) |
|
|
Distance between centers |
63” (1600mm) |
|
|
Headstock |
Spindle hole |
3.2” (82mm) |
|
Spindle nose camlock |
D1-8 |
|
|
Spindle to sleeve taper |
|
|
|
Spindle speed |
12 Steps, 25 – 1500 RPM |
|
|
Spindle speed ranges |
(25,40,55,75,90,130,190,270, 470,720,1020,1500) |
|
|
Carriage |
Bearing length on ways |
18” (500mm) |
|
Cross slide width |
6.8” (170mm) |
|
|
Cross slide travel |
12” (295mm) |
|
|
Top slide (compound) travel |
5” (127mm) |
|
|
Feed Box |
Thread capacity (inches) |
45, 2 - 72 TPI |
|
Thread capacity (metric) |
41, 0.2 - 14 MM |
|
|
Modular threads range |
18, M0.3 – 3.5 |
|
|
Diametral pitch range |
21, D.P. 8 - 44 |
|
|
Longitudinal feeds |
0.0015 – 0.04 IPR |
|
|
Cross feeds |
0.00075 – 0.02 IPR |
|
|
Tailstock |
Quill diameter with tang |
2.56” (65mm) |
|
Quill travel |
5.9” (150mm) |
|
|
Quill taper |
MT#5 |
|
|
Power |
Main motor |
7.5 HP |
|
Coolant pump motor |
1/8 HP |
|
|
Control circuit voltage |
110 V |
|
|
Dimension |
Shipping dimension (LxWxH) |
114”x39”x58.3” |
|
Weight |
Net weight (approx) |
4510 LBS |
|
Gross weight (approx) |
4642 LBS |
