Hydro-Jet Vario 1313


Not provided

Stock #




Request A Quote

Keep Scrolling To Learn More


Equipped With

Working Area
Table load capacity164 lbs/ft?
Fill capacity of sand container (max)2,200 lbs
Sand infeed for cutting (max.)60 - 500
Travel X-axis51.2 in
Travel Y-axis51 in
Travel Z-axis6 in
Rapid Feed
Rapid feed315 in/min
Positioning accuracies± 0.004 in
Repeatabilities± 0.0019 in
High pressure system
Motor rating49.6 Hp
Flow rate1 gal/min
Continuous operating pressure (max.)58,000 psi
Max. operating overpressure60,900 psi
Stroke number38 rpm
Gear ratio1:21,78
Oil tank capacity34.32 gal
Environmental temperature for oil/air cooler10 - 35¡
Environmental temperature for oil/water cooler10 - 45¡
Required air pressure3.26 lbs/s
Water pressure, with booster pump15 - 44 psi
Water infeed0.5 "
Waste water connection3/8 "
High pressure connection, 3/8" and 9/16" HP pipeM 30x2
Air supply80 - 102 psi
Compressed air connection for tube (OD)0.24 in
Required power connection125
High pressure pump dimensions71x31x45 in
Weight2,200 lbs
Measures and Weights
Overall dimensions (length x width x height)115x111x83 in
Weight without water4,400 lbs
Weight with water8,800 lbs
Part No. 166226

5-axis cutting system

  • Chamfering up to 60¡
  • TaperControl - cutting angle correction feature
  • 5-axis cutting kinematics using harmonic drives = high dynamics and precision
  • Endless Rotating = no contour disruption and no repeat plunge-cut required = time and cost savings

Standard Equipment

  • Completely equipped for Abrasive & Pure-Water Cutting
  • Flying Bridge design featuring an exceptionally solid construction
  • All axes are driven via high-quality servo-motors and run on preloaded ball screws
  • Work space is open on 3 sides allowing optimum material handling
  • Premium CNC control system for maximum operator comfort

ALLFI Abrasives system

  • Very large metering bandwidth and high-precision dosing of abrasives
  • Infinitely variable metering can be set directly at the machine's control panel
  • Large abrasives tank (1 t) accepts entire "big bags" from abrasives suppliers

The Water-Jet is a universal tool with many benefits:

  • No thermal stresses, hardening, or tensions on the part
  • No dust, smoke or toxic fumes
  • Small kerf width and very clean cut edges
  • Virtually burr-free cuts = no rework necessary
  • Direct plunge-cut at any position
  • Very low mechanical stress on the part

BFT Ecotron¨ 40.37+ High-Pressure System

  • This powerful high-pressure pump with 50 HP drive delivers up to 1.004 Gallon water per minute, making it the first choice for abrasive water-jet cutting
  • The most cost-effective high pressure pump made by a world leading manufacturer
  • Operating pressure can be adjusted from 50 to 400 MPa via an infinitely variable proportional valve
  • Optimized hydraulic system
  • Available with oil/air cooler or oil/water cooler
  • All components are mounted on a base frame, enclosed within a sound proofing enclosure; the electric control is within a control cabinet that also is mounted on the base frame
  • Including booster pump
  • Pressure booster with large plunger diameter and long stroke ensures long life
  • Pressure booster with exceptional lifetime and large pulsation damper
  • Maximum power and reliability for pure-water and abrasive cutting operations
  • Maximum operator safety and low maintenance
  • Water supply will be interrupted automatically when the pump is shut off
  • Pulsation damper with large reservoir (0.4 gal) reduced pressure fluctuations
  • Pressure relief valve is standard
  • All warnings and monitoring functions are displayed in plain text on a touchscreen monitor
  • Hydraulic drive with axial-piston pump
  • Oil/water heat-exchanger for oil cooling system
  • Pressure booster, complete with high-pressure tubing
  • Pulsation damper with pressure accumulator
  • Relief valve integrated in the high-pressure circuit

The Hydro-Jet High-Pressure System with pressure transmitter is based on a high-pressure pump with hydraulic drive, pressure transmitter, pulsation damper, pre-filter unit, and pressure relief valve - all mounted on a common base frame.

The quick-relief valve maintains atmospheric pressure in the pipe system upon completion of the cutting process. Sound proofing enclosure is available to dampen the noise level and to protect the high pressure system.

A proportional valve for automatic water pressure control via CNC control is included in the standard equipment.

The GPlus 450Cut features a customized user interface that was specifically designed to meet the special requirements for 2-D cutting

  • Easy, user-oriented operation allows quick creation of programs
  • Geometry imports from DXF and DIN/ISO program files
  • Faulty geometries can be repaired and edited with the integrated DXF Analyzer
  • 50 standard macros simplify the creation of a wide variety of geometries
  • Instant display of all starting cut changes in the drawing with simulation option
  • Optimum material utilization via grid nesting function with critical features like turning, mirroring, and manual sorting
  • Material database with plate management function - for the management of all customer-specific data on machined materials, including cutting technology data, and dimensions
  • Optimum contour approach made possible by a multitude of definable starting cut conditions differentiating between circular and non-circular inside and outside contours
  • Zoom feature - enlarges the part view and all starting cuts
  • User-friendly HMI allow modification of any cutting parameters during cutting, plus easy operation including all required service messages
  • Cutting and marking in one program
  • Option: contour nesting for nesting several part types on one plate - ensures optimum plate utilization and time savings
  • Calculation assurance: machining time and material consumption can be quickly determined using the cut simulation
  • Online Help: we provide prompt and proficient online support
  • Industrial PC-based CNC
  • Block processing time: 450 NC blocks per sec
  • 40 GB hard drive storage
  • 2.0 GHz Intel Celeron processor
  • 10/100 MBit Ethernet interface (to load NC programs from a network)
  • USB port for data transfers

  • separate cutting table
  • stainless steel support slats
  • BFT Ecotron 40.37 high-pressure pump with soundproofing enclosure
  • proportional valve
  • check valve
  • abrasive cutter head
  • HD filter at the cutter head
  • abrasives conveyor system
  • abrasives container for 2200 lbs sand supply
  • swiveling control panel with TFT monitor attached to the machine
  • electronic hand-wheel
  • GPlus 450 Cut CNC
  • CAD/CAM software with nesting program
  • operating manual and programming instructions


There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services