KNUTH LASER-JET 2512 FL 2000 LASER CUTTING MACHINE

Manufacturer

KNUTH

Model

Laser-Jet 2512 FL 2000

Year

Not provided

Stock #

16237

Condition

New

Request A Quote

Keep Scrolling To Learn More

Specifications

Equipped With

Working Area
Workpiece support height39 in
Throat width112 in
Throat height2.4 in
Max. work piece weight51 lbs/ft?
Travels
Travel X-axis98.4 in
Travel Y-axis49 in
Travel Y-axis extension (optional)59 in
Travel Z-axis3 in
Rapid Feed
Rapid feed2,362 in/min
Accuracies
Positioning accuracies± 0,05 / 0,002" in
Repeatabilities± 0,05 / 0.002" in
Ytterbium Fiber Laser FL 2000
Shaft length1.07 - 1.08 µm
CW beam power, min.200
CW beam power, max.2,100
Pulse peak power2,000
Pulse frequency max.2,000
Power consumption max.8.31 Hp
Power stability± 2%
Measures and Weights
Overall dimensions (length x width x height)152x89x79 in
Weight4,620 lbs
Part No. 140873

Equipped with fiber lasers with various beam powers. Lowest operating cost due to highest efficiency.

  • Laser Cutting Systems with extremely small foot-prints
  • minimum requirements for the setup site
  • Very ergonomic handling and easy operation

Due to the fiber laser's shorter wavelength, the cutting process is performed within a sealed enclosure. The enclosure automatically closes upon start of a cutting job and opens at the end of the cutting operation to allow direct removal of cut parts.

Laser-Jet Cutting Systems feature a transverse layout:

  • Machine bridge runs along the long work surface dimension (X axis) The cutting table does not have to be pulled out of the machine for plate loading and parts unloading.

Machine control can be connected to the internet. This will allow remote control functions and remote diagnostics and monitoring of the system state.

  • Laser beam is guided in a flexible fiberoptic cable, eliminating the requirement to clean beam travel optics
  • Cutting lens is protected by an easy to replace protective glass lens
  • Virtually maintenance-free laser operation
  • Automatic cutting process guide, height sensing
  • Labeling of cut parts with the same cutter head
  • Available with manually retractable cutting table, or with automatic changer table System
  • Can be equipped with cutting drawers (optional)
  • Turning unit for tube machining can be integrated into the work surface (optional)

Powerful PC Control for all Laser-Jet Cutting Systems

  • Innovative hardware with a modular design (Including self-diagnostics for every individual module)
  • Rapid data refresh rate (0.25 ms clock time = 4000 Hz for position control)
  • Large data storage for extensive cutting jobs
  • PLC and NC kernel are protected against Windows crashes
  • 3 USB ports for data transfers and internet connection (Allows remote control of machine by the customer and remote diagnostics by the manufacturer for application consultation and system analysis - Advanced Remote Control
  • User-friendly, easy-to-learn HMI (Separate windows for manual operation, data entry, cut simulation, automatic operation)
  • Automatic parameter settings via technology database (Parameters can be adjusted during cutting operation to optimize the cut; cutting geometries can be directly imported from DXF, DIN/ISO files)
  • Pre-selected routines to guide the cutting process along a contour (Engineered cutting solutions)
  • Easy resuming of cutting process after an interruption

The optional CAD-CAM Software Packages include:

  • Easy cutting program creation without any CNC knowledge, geometry imports from DXF, DWG, DIN/ISO files
  • Analyzer for testing and editing of geometry files
  • 50 macros with configured standard geometries
  • Technology assignment for engraving label text and cutting contours
  • Automatic design of starting cuts, insertion of lands, bridges and chain cutting programming, starting cuts from the edge
  • Grid Nesting
  • Extension for parquet, contour and manual nesting, for the creation of common cut lines and separation cuts to remove plate material excess, excess material management
  • Extension for calculation of cutting time and parts cost

Technological Equipment

  • IPC: Intel Core i3, 2 Cores, 2.2 GHZ, 2 GB DDR3-RAM, 320 GB hard drive, EtherCAT field bus, Ethernet 10/100, 4 x USB 2.0
  • Windows 7 Professional, 32 Bit, separate on an IPC Core
  • I/O: Bus terminals according to Beckhoff, New Automation Technology
  • CNC: TwinCAT NC I + NC PTP + TwinCAT PLC as Multi-PLC
  • CADCAM (optional): cncCUT in PC Version 2D (IBE Software) + GPlus/Laser Ð Post-Processor

  • Complete system with PC control
  • Ytterbium fiber laser
  • fiberoptic cable
  • High-pressure cutter head
  • capacitive height sensing
  • toggle for cutting gas/cutting pressure
  • support grid for metal cutting
  • automatically moving protective enclosure
  • coolant regeneration
  • operating manual and programming instructions

Attachments

There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services