The Kent CNC 5-Axis Milling Turning Center provides 2 excellent configurations for complex multi-tasking milling and turning. The sub-spindle system is built on an independent guideway to provide maximum support. Both 5-axis milling turning centers are also equipped with a 20 ATC system for multi-tasking processing.
| Maximum Cutting Diameter |
37.4″ |
| Center Height |
27″ |
| Distance Between Centers |
118.1″-551.2″ |
| Control |
Fanuc 0i-TF |
| Bed Width |
43″ |
| Bed Way |
2 Box way for Carriage; 1 V-Way and 2 flat way for tailstock and steady rest |
| Spindle Bore |
6″ (Opt. Up to 16″) |
| Spindle Nose |
A2-11 (Opt. Up to A2-28) |
| Spindle Speed |
9-900 to 5-250 RPM |
| Spindle Center |
MT#6 |
| Spindle Power |
40/50 HP |
| Quill Diameter |
7.87″ (Opt. 9.8″) |
| Quill Stroke |
9.8″ |
| Quill Movement |
Hydraulic |
| Tailstock Center |
MT#6 |
| |
|
| X-Axis Feed Rate |
197 ipm |
| X-Axis Ballscrew Diameter |
50mm x P5 |
| X-Axis Stroke |
22″ |
| Z-Axis Ballscrew Diameter |
80mm x P10 |
| Z-Axis Stroke |
118″ up tp 551″ |
| Y-Axis Feed Rate |
197 ipm |
| Y-Axis Ballscrew Diameter |
40mm x P5 |
| Y-Axis Stroke |
±3.9″ |
| Boring Bar Compound with Tailstock |
|
| Control |
Fanuc 0i-TF |
| X2 Servo Motor |
5.4 HP |
| Z2 Servo Motor |
9.4 HP |
| Boring Bar Diameter |
5.9″ (Opt. 9.8″) |
| Internal Holte Maximum Cutting Diameter |
9.8″ – 33″ (Opt. 13.8″ – 37″) |
| Internal Hole Maximum Cutting Depth |
59″ (Opt. 98.4″) |
| X2 Rapid Traverse |
197 ipm |
| X2 ballscrew Diameter |
40mm x P5 |
| X2 Stroke |
11.8″ |
| Z2 Rapid Traverse |
197 IPM |
| Z2 Ballscrew Diameter |
63mm x P5 |
| Z2 Stroke |
118″ |
