The Kent CNC 5-Axis Milling Turning Center provides 2 excellent configurations for complex multi-tasking milling and turning. The sub-spindle system is built on an independent guideway to provide maximum support. Both 5-axis milling turning centers are also equipped with a 20 ATC system for multi-tasking processing.
| Maximum Cutting Diameter |
37.4″ |
| Center Height |
31.7″ |
| Distance Between Centers |
196.9″ |
| Control |
Fanuc 31iB |
| Bed Width |
50.8″ |
| Bed Way |
2 Box way for Carriage; 1 V-Way and 2 flat way for tailstock and steady rest |
| Spindle Bore |
9.1″ |
| Spindle Nose |
A2-15 |
| Spindle Speed |
9-600 RPM |
| Spindle Center |
MT#6 |
| Spindle Power |
40/50 HP |
| Sub Spindle Mode |
Kenturn MV2005B-CTS + 20 Tool ATC |
| Sub Spindle Servo Motor |
Fanuc 15/6000i |
| Sub Spindle Speed |
300-4500 RPM |
| Tool Size |
BT50/CAT50/ISO50 |
| Quill Diameter |
7.87″ / 9.84″ |
| Quill Stroke |
9.8″ |
| Quill Movement |
Hydraulic |
| Tailstock Center |
MT#6 |
| X-Axis Feed Rate |
197 ipm |
| X-Axis Ballscrew Diameter |
50mm x P5 |
| X-Axis Stroke |
33″ |
| X-Axis Servo Motor |
Fanuc 5.4 HP |
| Z-Axis Ballscrew Diameter |
80mm x P10 |
| Z-Axis Servo Motor |
Fanuc 9.4 HP |
| C-Axis Indexing System |
CS Axis |
| Y-Axis Feed Rate |
±4″ |
| Y-Axis Ballscrew Diameter |
40mm x P5 |
| Y-Axis Servo Motor |
Fanuc 5.4 HP with Brake |
| B-Axis Index Accuracy |
15″ |
| B-Axis Motor |
Fanuc 4 HP |
| B-Axis Min Increment |
0.001 mm |
| B-Axis Traverse |
±90° |
| Steady Rest Quill Diameter |
3.15″ (Opt. 4.13″) |
| Steady Rest Capacity |
11.8″-19.7″ (Opt. 29.5″-37.4″) |
