Not provided

Stock #




Request A Quote

Keep Scrolling To Learn More


Equipped With


(Also Available In 60" & 80" Centers

  • Flat bed CNC Teaching Lathe with FAGOR 8055iA control and drive system
  • User friendly conversational programming language
  • Different modes of operations available
  • Operate as manual lathe with electronic handwheels
  • Operate as a full CNC lathe with programmable speed, 
  •        using conversational language or G code language
  • Operate semi automatically, combining manual and CNC operations
  • Teach mode
  • OEM 2-axis CNC, 12.1” TFT CNC Chassis & Floppy driver. Std 20 inputs/12 outputs
  • D1-8 camlock spindle, 3-3/8” spindle bore
  • Geared head with 3 steps speed change, programmable speed
  • One Piece Cast Meehanite Bed
  • 10 HP Spindle Motor (For 22” TC Model)

CNC CONTROL 8055i/A by Fagor:


  • Manual – the lathe is operated like a conversational lathe, using the 2 electronic handwheels in the front to move the axes.  In addition if offers convenient features such as digital readout and constant surface speed.
  • Semiautomatic – it allows 2 axes to be controlled with the cranking of 1 handwhel, the machinist can cut arcs, tapers and chamfers. 
  • Automatic – with ability to execute any program, plus background editing capability. Powerful tool inspection mode included as well as full program control from keyboard programs to choose from, the 8085i/A will control everything from start to finish.
  • Single step – the machinist can go through all or part of the process by executing the program step by step. 


  • Conversational – icon key with conversational graphic screens for easy operator data input. No prior programming experience needed
  • G-code – this programming enables utilization of some sophisticated features such as parametric or variable programming. Auto –prompt via the help key prompts operator though graphic & text help screens.


  • Teach-in mode – the first part can be made manually while the control records the corresponding program, and then additional parts can be made in automatic mode. 
  • Canned Cycles – by selecting the associated ICON key or G-code, the CNC will prompt you through all canned cycles including Turning, Facing, Grooving and Threading, All equipped with a Thread Repair Canned Cycle.
  • On-board  profile editor for easy blue print programming. Simply enter the data right off the blueprint, the CNC automatically creates the program including complex profiles..
  • Solid graphic as standard with tool shape representation standard and available for use in both Execution and Simulation mode, Also with line graphic capability.
Swing Over Bed 20”
Swing Over Cross Slide 12-1/4”
Height of Center 11”
Distance Between Center 80”
Maximum Turning Length 75.30”
Width of Bed Ways (Construction) 13” (2 V-Way and 2-Flat Way, Ellipse Rib)
Total Length Bed 118”
Swing Over Gap 30-3/4”
Length of Gap 11-3/4”
Width in Front of Face Plate 6-3/4”
Spindle Nose Type D1-8 Camlock
Spindle Bore 3-3/8”
Bar Capacity 3 -1/4”
Taper of Spindle Bore w/Center Sleeve MT# 5
Spindle Speeds (3 steps) 1500-180, 300-30, 60-10 rpm
Bearing And Size 3 Points Supported
Cross Slide Travel /Feed (X axis) 11”
Ballscrew Diameter (X axis) Dia. 1” x Pitch .2” C5
Cross Slide Rapid Travel (X axis) 236 ipm
Axis Motor (X axis) Yasakawa 220V 0.9Kw 7.3Nm AC Servo
Longitudinal Travel /Feed (Z axis) 76-3/8”
Ballscrew Diameter (Z axis) Dia. 1.6” x Pitch .4” C5
Longitudinal Rapid Travel (Z axis) 315 ipm
Axis Motor (Z axis) Yasakawa 220V 1.3Kw ; 7.3Nm AC Servo
Drive motor (X & Z axis) Yasakawa
Maximum Size Cutting Tool 1” x 1” For Square Tool;
Hydraulic Turret (Optional) 8 Tool Section; Index time: including locking
Electrical Power Turret (Optional) 6 Tool Section; Index Time: 0.4 sec.
Electrical 4-way Power Turret (Optional) 4 Tool Section; Index Time: 1.0 sec.
Width of Cross-slide Cover 7-1/4”
Quill Diameter 3”
Quill Taper MT# 5
Quill Travel 6-5/16”
Pump Motor 220V/12W/1Phase
Discharge Volume .034 gal/min
Discharge Pressure 114 PSI
Tank Capacity .53 gal
Pump Motor 1.8 HP 0.1kw
Capacity & Pressure 6.6 gal /min
Tank Capacity 37 gal
Main Spindle Motor 10 HP 3-Phase Continuous Rating Induction
Invertor Yakasawa 220V 10HP
Fagor Fagor 8055iA Mode, 11” Full-Key LCD,
Dimensions (LxWxH) 148”x60”x75”
Net Weight (approx.) 6160 lbs
220V 15KVA/50 amps
440V 15KVA/25 amps


There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services