NEW SHARP SV-2517S-F BOX WAY CNC VERTICAL MACHINING CENTER

Manufacturer

SHARP

Model

SV-2517S-F

Year

Not provided

Stock #

14634

Condition

New

Request A Quote

Keep Scrolling To Learn More

Specifications

Equipped With

NEW SHARP SV-2517S-F BOX WAY CNC VERTICAL MACHINING CENTER

  • 25” x 17” x 18” travel
  • Hardened and ground Box ways with TURCITE coating
  • 8,000 rpm, CAT 40 spindle
  • 16 tools carousel type ATC
  • Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
  • Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
  • Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle,  4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
  • Chip wash nozzles are installed at each side of machine base (standard)
  • Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
  • Machine wt. 8,200 lbs
Box Way Vertical Machining Center SV-2517S-F
Work Capacity
Travel X,Y,Z 25.2"x17.1"x23.6" (SZ-F)           
   
Spindle Nose to Table 3.1 - 21.2 (S-F, SE-F)   
Spindle Center to Column 19.3"
Work Table
Table Area     27.5" x 16.5" 
Spindle
Spindle Taper CAT 40
Spindle Max. Speed 8,000 rpm
Driving Type Belt Drive
Motor (30m/cont.) 10 / 15 HP  (7.5 / 11 kw)
Automatic Tool Changer (ATC)
Magazine type Carousel
Magazine Capacity 16
Max. Tool Diameter 2.9" (75mm)
w/o adj. tool, max dia. 5.9" (150mm)
Max Tool Length 11.8" (300mm)
Max Tool Weight 15.4 lbs (7kg)
Air Blast at Tool Change Standard                                     
Motion
Cutting Feed Rate 0.04 - 393.7 IPM
Rapid Traverse X / Y / Z: 787 IPM
Accuracy
Positioning Accuracy  0.00016 "
Repeatability Accuracy 0.00012 "
CNC Control Features
Controller Fanuc Oi-MF
   
Programming Assist                                                    Manual Guide
4th Axis Support Standard
Screen Size 8.4 LCD
Coolant System
Flood Coolant Nozzles 2
Coolant Tank Capacity 42 gal. 
Chip Pan                                                     Standard
Power Requirement
Electrical 220V/3 Phase/20 KVA/60 Hz
Air 6 CFM @ 88 psi
Machine Measurements
Floor Space 80" x 87"
Height 99"
Door Opening 28.4"
Weight 8200 Lbs

STANDARD ACCESSORIES

  • Fanuc Oi-mate-MF control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
  • Full metal enclosure with 2 large side doors
  • Coolant system with enlarged coolant tank
  • Coolant gun
  • Auto lubrication system
  • Rigid tapping
  • Air gun
  • Removable electronic hand wheel (MPG)
  • Door interlock
  • Chip pan
  • Air accumulator
  • Heat exchanger for electric cabinet
  • Florescent work light

OPTIONAL ACCESSORIES

  • 4th axis software from Fanuc
  • 4th axis kit prepped ( electrics, cables unit)
  • 4th axis with rotary table (complete with drives, motor)
  • Scrapper type chip conveyor
  • Hinge type chip conveyor
  • Oil skimmer
  • Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
  • CTS 20 bar/70 bar (300/1,000 psi) pump with tank
  • Tool Probe (Renishaw TS27R)
  • Tool Setter (Renishaw OMP40

Attachments

There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services