NEW SHARP SVX-300 5-AXIS CNC VERTICAL MACHINING CENTER

Manufacturer

SHARP

Model

Not provided

Year

Not provided

Stock #

14656

Condition

New

Request A Quote

Keep Scrolling To Learn More

Specifications

Equipped With

NEW SHARP SVX-300 5-AXIS CNC VERTICAL MACHINING CENTER

  • 30" x 23.6" x 19.7" travel (X,Y,Z)
  • 11.8" Trunnion table with A and C axis travel.
  • 12,000 rpm, CAT 40, 15 HP
  • Fanuc 31i-B5 control, also available Heindenhain or Siemens control. 
SHARP SVX-300    
     
SPECIFICATIONS UNIT  
Control    
Fanuc   31i-B5
Screen Size   10.4"
*Siemens, Heidenhain control are also available
Travel    
X axis travel inch (mm) 30" (760)
Y axis travel inch (mm) 23.6" (600)
Z axis travel inch (mm) 19.7" (500)
A axis travel Degree -120 ~ 30°
C axis travel Degree 360°
Spindle nose to table (A=0°) inch (mm) 3.9"-23.6" (100-600)
     
Table    
Table area inch (mm) 11.8" (300)
Max workpiece wt. lb (kg) 330  (150)
T-Slot (Width x Degree)   0.7"x 45° (18 x 45°)
Spindle    
Speed rpm 12,000
Taper   CAT40
Bearing   Ceramic bearing
Type   Direct Drive
Spindle oil chiller   Oil Type
Feed Rate    
Rapid traverse X/Y Axis ipm (mm/min) 1,417 (36,000)
Rapid traverse Z Axis ipm (mm/min) 1,417 (36,000)
Cutting feed rate ipm (mm/min) 0.04-393 (1-10,000)
Transmission   Direct Drive
Motor    
Spindle motor Hp (Kw) 10/55 (7.5/11)
     
Automatic Tool Changer    
ATC capacity   24
Method of tool selection   Set tool number
ATC type   Arm type, CAT40
Max tool diameter inch (mm) 2.9" (75)
Max. tool length inch (mm) 11.8" (300)
Max. Tool weight lb (kg) 15.4 (7)
Without adjacent tool inch (mm) 5.9" (150)
Air blast at tool change   OK
Accuracy    
X, Y, Z axis: Position inch (mm) +/-0.0002" (0.0015")
X, Y, Z axis:Repeatability inch (mm) +/-0.00012" (0.0015")
A axis: Position arc seconds +-15
A axis: Repeatability arc seconds +-6
C axis: Position arc seconds +-15
C axis: Repeatability arc seconds +-6
Machine measurements    
Floor space inch (mm) W: 91.3"(2320) x D:119" (3,000)
Height inch (mm) 124.1" (2,960)
Weight lb (kg) 28,050 (12,750)
Door opening inch (mm) 43.3" (1,10)
Coolant system    
Flood coolant nozzles   6
Coolant tank capacity gal (L) 53 (240)
Chip Conveyor   Hinge type
Air blower nozzle (for cutting dry)   1
Power requirement    
Electrical 220V/60 Hz 3 Phase/45 KVA
Air   6 CFM @ 88psi

Standard Accessories 

  • Fanuc 31i-B5 control, 10.4" color LCD
  • Tool setter
  • Work piece probe
  • Spindle air blast (Auto)
  • Electric cabinet heat exchanger
  • Spindle oil chiller
  • Oil skimmer
  • Hinge type chip conveyor with bucket
  • Fully enclosed splash guard
  • Coolant system-240L tank capacity
  • CTS preparation (70 Bar)
  • Coolant Gun, air
  • AICC II (200 block look ahead)
  • Manual guide I
  • USB port
  • Embedded Ethernet
  • RS-232C Interface
  • 2 MB memory
  • 3 Dimensional cutter
  • 3D interference check
  • High-speed smooth TCP
  • Rigid tapping

Attachments

There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services