Royal Master Generation 5.1 CNC Guidewire Profile Centerless Grinder Grinding Wire from: .0001" to .250", up to 17', with Scale Feedback to: .000004", Touch Screen CNC Windows Based Control (Upgraded), 7.5 HP.
New 2003
Machine Capabilities:
Grinding Feed Rate - In Guide Wire Mode: 1.0" per second (25mm/second)
Diameter Capabilities: .0015" to .750"
Wire Diameter: .0001" to .250" (.02mm to 6.35mm Standard)
Usable Wheel Width: 1.5"
Linear Slide Resolution: 6349.9 Linear Counts per Inch
Linear Accuracies: +/- .0005" (+/-.012mm)
Diameter Resolution: .000004" (.0001mm)
Diameter Accuracies: .00004" (.001mm)
Grinding Wheel Diameter: 12"
Inverter for Speeds up to: 9,000 SFPM (Surface Feet Per Minute)
Position Accuracies are based on the wire position and updated every .0025" as the wire passes the sensing
pixals.
Main Machine Components:
Machine is Based on a TG-12x4 Hi-Accuracy System
Servo Motors
Ball Screw .00001" (.00025mm) Ram Positioning
Glass Scale Feedback: .000004" ( .0001mm)
Linear Movement:
Linear Actuator with Sony Magnetic Encoder
Levin Spindle System with 1C Collets
Operator Interface: Windows 2000, Pentium Grade Computer with 15" Flat Screen Monitor
Touch Screen
Equipped with:
Royal Master Control: Strongarm – Windows Based
CNC Windows Base Touch Screen Control
2 - 7” Air Sensing Hyd. Dressers Over Wheels
Servo Driven Over the Wheel Dressers
Coolant System with Paper Filtration
143” Length Fully Automated Wire Loader/Unloader on Stand
Spindle Load Meter